KRS Fabrication Pty Ltd supplies premium reinforcing trench-mesh panels specifically manufactured for residential footings, deep boundary trenches, and narrow strip foundations. Trench-mesh provides excellent horizontal tensile strength to support masonry and perimeter load-bearing walls.
Fabricated in long, narrow panels of 6.0m lengths, our trench-mesh is available in standardized widths to slot directly into common trench cuts (from 200mm to 500mm wide). Pre-spaced cross wires keep the main longitudinal wires rigidly aligned, preventing skewing during concrete pouring.
| Property | Standard Specs |
|---|---|
| Common Layout Codes | 3-Bar (8mm, 11mm, 12mm), 4-Bar (8mm, 11mm, 12mm) |
| Panel Widths | 200mm, 300mm, 400mm, 500mm (6.0m standard lengths) |
| Longitudinal Wire Grades | Grade 500L (Normative footing-wire standard) |
| Australian Standards | AS/NZS 4671:2001 (Steel reinforcement for footings & foundations) |
| Cross Wire Spacing | Rigid welded spacing every 300mm |